1. Arsilac
  2. New & used products available
  3. STORAGE AND MIXING TANK
  4. Stainless steel tank
  5. Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit
Sold
1 / 11
Ref. 006504
Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit

Stainless steel tank 304 L - Isolated tronconics - Compartmentalized and shell circuit

BIO INOX
172 HL (17 200 liters)

Detailed description :

TECHNICAL FEATURES
- Compartmented tank : 100 HL + 72 HL
- Density : 1 kg / dm3
- Material manufacturing in 2011
- Tanks used during 1 campaigns

Construction
- Vertical trunk tank
- Conical dome centered with tile radius 30 mm
- Flat bottom 4 % with 30 mm radius
- Implantation : interior
- 4 ft chassis + 1 adjustable trunk central with distribution platinum ø130

Interior finish : Gloss annealing surfaces for dome, viral and bottom. Apparent welds.
Exterior finish : Dome and viral polished grain 220. Shaved welds

Isolation
- On virole and dome : injection polyurethane foam, thickness between 50 mm and 120 mm, according to tank design.
- Density : 45 kg / m3
- Insulation is protected by a double welded stainless steel grades 1.4301 (AISI 304)

Treatment Processing
- All welds are made in neutral gas atmosphere.
- Welds are stripped and all welds and interior and exterior surfaces are passivated.

Materials
- All surfaces in contact with the product are stainless steel grade 1.4307 (AISI304 L). Brilliant annealing for virole, dome and bottom.
- All other stainless steel parts are in grade 1.4307 (AISI 304 L

High compartment equipment
On the dome :
- 2 lifting rings
- 1 DN 1000 mm hatch on clamp for pigeage with fall grid and double male for sprinkler
- 1 DN hatch 200 mm anti-retention anti-swivel with 120° stop, with aseptic belt stitch (excluding bonde)
- 4 gateway supports (for gateway load distributed 850 kg / m2)
- 1 grounding leg under 1 gateway stand
- 1 stainless steel valve depression pressure-5 /+ 35 mbar
- 1 male stitch M6CON DN50 on the chimney lid
- 1 M7CON DN50 male double fitting in chimney
- 1 nitrogen stitching 20/27
On the virole :
- 1 stainless steel builder plate
- 1 stainless steel taster faucet mounted on oval bride
- 1 removable level rule (1 rule per type of tank)
- 1 SMS 76 clear draw valve on square bridle with plug and stainless steel chain
- 1 drainage grid height 1500 to persian
- 1 SMS 76 clear draw valve on square bridle with plug and stainless steel chain
- 1 elbow decanter DN 70 beveled
- 1 winemaking door 410 x530 exterior opening
- 1 stainless steel slime under door
- 1 glove finger for probe (off probe)

Equipment low compartment
On the dome :
- 1 DN 200 mm swivel anti-retention articulated hatch with 120° stop with stitching for aseptic bonde (excluding bonde); welded hatch on chimney at 30°
- 1 stainless steel valve depression pressure-5 /+ 35 mbar
- 1 male stitch M6CON DN50 on the chimney lid
- 1 nitrogen stitching 20/27
On the virole :
- 1 stainless steel builder plate
- 1 stainless steel taster faucet mounted on oval bride
- 1 SMS 76 clear draw valve on square bridle with plug and stainless steel chain
- 1 SMS 76 clear draw valve on square bridle with plug and stainless steel chain
- 1 elbow decanter DN 70 beveled
- 1 winemaking door 410 x530 exterior opening
- 1 stainless steel slime under door
- 1 glove finger for probe (off probe)

Air Conditioning
- Spiral thermal exchange circuit 125 x15 thickness 2 mm
- Exchange area : tank 100hl : 7.9 m2, 9 towers ; tank 72 hl : 3,4 m2 or 3 towers
- Input and exit on gas 20/27 sleeves with pipes brought back to the bridge level, including 15/21 sleeves and stainless steel plugs for purges.

Equipment reference
- DN 1000 Limatec Trape
- Sodime brand valves
- Rectangular door Elica brand
- Drainage grid Bellot brand
- Sodime brand taster tap
- Sodime brand level tap
- Level rule Samir brand

DIMENSIONS
- High diameter : 2344 mm
- Low diameter : 3049 mm
- Viral Height : 4100 mm
- Overall height : 5100 mm

Thicknesses :
- Dome and Virole : 25/10 mm
- Background : 30/10 mm

AUCTION SALE
Following the relocation of our activity to the Monteux site (84170), this equipment is currently being destocked.
Thursday 22 September 2022 will be the closing day of the online auction.
Create your account and participate in this auction, on the troostwijk auctions website.

arsilac-lien-troostwijk-auctions