Stainless steel buffer tank - Electric heating element - 007643

GENERAL DESCRIPTION
Horizontal cylindrical stainless steel buffer tank with an estimated capacity of 150 litres, equipped with an integrated electric heating system and Siemens temperature control. The unit is thermally insulated with rigid foam protected by a black casing.

TECHNICAL FEATURES
- Total capacity : approximately 150 litres
- Layout : horizontal tank on stainless steel support feet
- Material : stainless steel
- Insulation : black-coated rigid foam
- Inlets/Outlets : 2 ball valve connections and quick-connect couplings, fire hose type, approx. Ø 50 mm
- Hydraulic accessories : 1 air vent, 1 safety valve, 1 pressure gauge, 1 drain valve
- Heating element : 3 armoured heating elements 9,000 W – 230/400 V three-phase
- Main thermostat : Siemens RAZ-ST.02F, control range 15 °C to 95 °C, thermal safety device at 100 °C (STB)
- Power supply : 400 V / 50–60 Hz – three-phase
- Protection rating : IP43
- Thermostat manufacturer : Siemens Switzerland Ltd – assembled in Italy
- Type of application: heating of heat transfer fluid, domestic hot water, thermal control loop or industrial process
- Typical use : temperature maintenance or hot water storage in an industrial or wine-making circuit (coil heating, cleaning, thermal process, etc.)

ADDITIONAL INFORMATION
- Tank ready for electrical and hydraulic connection.
- Check the resistance (continuity, insulation) and thermostat before putting back into service.
- Can be used as a buffer tank, industrial water heater or process hot water heater for small installations.

DIMENSIONS
-Currently being drafted

ANNEXES
- 6-month warranty
- Complies with CE standards

_________________

TIPS AND NEWS

• Warranty
  Guide to quality guarantees for industrial equipment.