304L stainless steel storage tank - Thermoregulated - Cylindrical - Offset conical dome

TECHNICAL CHARACTERISTICS
- Effective capacity : 31,900 L
- Ferrule and bottom : INOX 304 L
- Dome: INOX 316 L
- Vertical cylindrical on feet
- Eccentric conical dome
- Conical bottom slope 38%
- Upper bottom slope : 21.26%
- Interior and exterior finish : glazed 2B
- Ferrule thickness 2 mm
- Decentered chimney Ø 400 mm and height 300 mm
- ELICA 316L stainless steel upper retention hatch
- 3 simple male DIN 80 fittings on the dome
- Double acting ELICA 1000 HL stainless steel 316L valve, horn mounting
- Oval autoclave door ELICA 308 x 440 mm interior opening at bottom of shell
- 5 lifting rings including 1 at the bottom of the tank
- support + manufacturer's plate
- 1 oval autoclave door 330 x 430
- Level measurement with full level: graduated stainless steel rule, 15 x 21 tap all SODIME stainless steel
- Taker plug with 316 stainless steel male taster SODIME
- Thermometer and probe socket with thermowell and needle thermometer
- 5 thermal regulation rings area 5.69>

- 2 thermal regulation rings with looping around the door,
area 2.28 Total thermoregulation area 7.97 m2
Note : The 2 layers are linked together.
- Clear draft ball valve on square flange
- 316 L stainless steel decanter elbow between square flanges
- Total drain pipe + square flange at the end of DN80 piping
- Total trial ball valve on square flange DN80
- Taken from the ground
- 4 external feet, tank height 1000 mm
- 1 stainless steel flat reinforcement belt 150 x 5
- 4 leveling cylinders
- 4 floor plates in 304L stainless steel
- Weight : 1329 kg

DIMENSIONS
- Diameter : 2900 mm
- Total height : 6294 mm